.ai

model AI open source terbaik

Cari

Node KSampler di ComfyUI

KSampler runs the denoising loop: it takes the model, prompts and a latent and produces the finished latent image, controlled by seed, steps, cfg, sampler, scheduler and denoise.

Paket node: ComfyUI core

Kategori: Sampling

Halaman ini belum diterjemahkan, jadi ditampilkan dalam bahasa Inggris.

Apa yang dilakukan KSampler

KSampler is where the image is actually generated. Starting from the input latent (random noise from Empty Latent Image, or an encoded picture for img2img), it asks the model to remove noise for the chosen number of steps, pulling toward the positive prompt and away from the negative one by the cfg amount. The result is a LATENT that VAE Decode turns into an image.

sampler_name selects the numerical method (euler, euler_ancestral, dpmpp_2m, dpmpp_2m_sde, dpmpp_3m_sde, uni_pc, lcm, ...) and scheduler the noise curve (normal, karras, exponential, sgm_uniform, simple, beta). denoise controls how much of the input latent is replaced: 1.0 for text-to-image, 0.3-0.7 for img2img and hires passes. KSampler (Advanced) exposes start and end steps for multi-stage sampling.

Input

Nama	Tipe	Artinya
model	MODEL	The denoising model, after any LoRA or ControlNet patches.
positive	CONDITIONING	What you want (from CLIP Text Encode, possibly through ControlNet Apply).
negative	CONDITIONING	What you do not want.
latent_image	LATENT	The starting latent: empty noise or an encoded image.
seed	INT	Noise seed. Same seed and settings reproduce the same image. control_after_generate sets fixed, increment, decrement or randomize.
steps	INT	Number of denoising steps. 20-30 for most SD models, 4-8 for Lightning, Turbo and LCM models.
cfg	FLOAT	Classifier-free guidance scale. 5-8 for SD 1.5 and SDXL, 1.0 for Flux and distilled models.
sampler_name	COMBO	The sampling algorithm.
scheduler	COMBO	The noise schedule.
denoise	FLOAT	Fraction of the noise to remove. 1.0 = start from scratch; lower keeps more of the input image.

Output

Nama	Tipe	Artinya
LATENT	LATENT	The sampled latent for VAE Decode or a second sampler.

Lewati penyiapan: workflow ComfyUI sudah terpasang di cloud

BitVector menjalankan workflow ComfyUI siap pakai di GPU miliknya sendiri. Tanpa instalasi, tanpa node hilang, tanpa kotak merah. Buka di ponsel atau laptop dan hasilkan dalam semenit.

Coba BitVector

Cara menggunakan KSampler

Connect MODEL, both CONDITIONINGs and a LATENT.
Set steps 25, cfg 7, dpmpp_2m with karras for SDXL; euler with simple, cfg 1 for Flux.
Set denoise to 1.0 for a fresh image.
Connect LATENT to VAE Decode and then Save Image.
Queue, then fix the seed when you want to iterate on the prompt.

Pengaturan dan tips

dpmpp_2m + karras is the all-round choice; euler_ancestral adds variety but never converges; dpmpp_2m_sde gives extra detail at the cost of determinism across GPUs.
Lightning, Hyper and Turbo checkpoints need their own settings: 4-8 steps, cfg 1-2, sgm_uniform or simple.
For a hires pass, feed the first latent through Upscale Latent By and a second KSampler with denoise 0.4-0.55.
Hold Ctrl+Shift+V to paste a node with its connections; useful when duplicating samplers.
A fixed seed with the same settings is reproducible on the same GPU; different cards can differ slightly.

Pemecahan masalah KSampler

Noise, static or a blurry blob instead of an image

Mengapa terjadi

The settings do not fit the model: cfg 7 on a distilled model, 4 steps on a normal model, a Flux model without Flux Guidance, or denoise far below 1 on an empty latent.

Cara memperbaikinya

Match the model page: normal SD = 20-30 steps, cfg 5-8; Lightning/Turbo = 4-8 steps, cfg 1-2; Flux = cfg 1, guidance 3.5, 20+ steps. Use denoise 1.0 when the latent is empty.

Deep-fried, oversaturated, high-contrast output

Mengapa terjadi

cfg is too high for the model or the LoRA stack, or an ancestral sampler with many steps.

Cara memperbaikinya

Lower cfg to 4-6, reduce LoRA strengths, or switch from euler_ancestral to dpmpp_2m.

torch.OutOfMemoryError: CUDA out of memory during sampling

Mengapa terjadi

The latent is too large for the card at this batch size, or another model (ControlNet, upscaler) sits in VRAM at the same time.

Cara memperbaikinya

Lower the resolution or batch_size, add --lowvram, use fp8 weights, or split the hires pass into a second queue so the first model is unloaded.

Error: mat1 and mat2 shapes cannot be multiplied

Mengapa terjadi

The conditioning comes from a text encoder of a different family than the model (SD 1.5 CLIP into an SDXL model, or vice versa).

Cara memperbaikinya

Wire the CLIP from the same checkpoint that provides the MODEL.

Images change every run although the seed is fixed

Mengapa terjadi

control_after_generate is set to randomize, or an SDE / ancestral sampler is in use with a non-deterministic backend.

Cara memperbaikinya

Set control_after_generate to fixed and prefer dpmpp_2m or euler for exact repeatability.

The same image repeats across prompts (seed stuck)

Mengapa terjadi

control_after_generate is fixed and the noise dominates at low cfg or low steps.

Cara memperbaikinya

Set it to randomize or increment and raise cfg slightly.

Jalankan workflow ini dari ponsel Anda

Setiap workflow di halaman ini sudah terpasang di BitVector lengkap dengan model dan node kustomnya. Pilih satu, ketik prompt, selesai. Nol penyiapan, tidak ada yang perlu diunduh.

Coba BitVector

Pertanyaan tentang KSampler

What is the difference between KSampler and KSampler (Advanced)?

Advanced adds add_noise, start_at_step, end_at_step and return_with_leftover_noise, which lets you split sampling across two models, for example SDXL base then refiner.

Which sampler is fastest?

euler and dpmpp_2m take one model call per step; the _2s and _3m variants take more. LCM and Lightning models are fast because they need few steps, not because of the sampler.

What does denoise do with an empty latent?

Anything below 1.0 leaves part of the original noise in the output and produces fog. Keep 1.0 for text-to-image.

Node terkait

KSampler (Advanced)

ComfyUI core

KSampler (Advanced) is KSampler with step-range control: add_noise, start_at_step, end_at_step and return_with_leftover_noise, used for base + refiner chains and two-model sampling.

Empty Latent Image

ComfyUI core

Empty Latent Image creates the blank latent canvas (width, height, batch_size) that text-to-image sampling starts from; dimensions must be multiples of 8 and match the model family.

VAE Decode

ComfyUI core

VAE Decode converts the sampled LATENT into a pixel IMAGE with the VAE; VAE Decode (Tiled) does the same in tiles for very large images.

CLIP Text Encode (Prompt)

ComfyUI core

CLIP Text Encode turns a text prompt into CONDITIONING using the model text encoder. One node holds the positive prompt, a second one the negative prompt.

Upscale Latent and Upscale Latent By

ComfyUI core

Upscale Latent resizes a latent to a new size (or by a factor) so a second KSampler can add detail at higher resolution: the classic hires fix.

Lelah memperbaiki node? Biarkan cloud yang mengerjakan

BitVector menjaga ratusan workflow ComfyUI tetap terpasang, terbaru, dan teruji di GPU cloud yang cepat. Tanpa Python, tanpa error CUDA, tanpa batas VRAM. Bisa dari browser apa pun.

Coba BitVector